Oppo A57 Pattern And FRP Remove

Oppo A57 Pattern and FRP Protection Remove Tool and Guide 2020

Oppo A57 is a Android Handset Based on Qualcomm Chipset, at Some Points you lost access to your phone just because you forget your oppo a57 pattern or pin. you can’t use it unless you draw your pattern or enter your pin, if you owe a handset with pattern lock or pin lock, you are at right place but sometimes you don’t have a backup phone read this post till end , this will help you to unlock your phone.

Follow Below Step By Step Guide To Remove All Locks Of Your Oppo Smartphone

 
Prerequisite
A USB cable
Locked qualcomm handset
Pc
Qualcomm Drivers installed
Miracle box

How to install Qualcomm driver
 
Download Driver From Here.
Extract Zip using Winrar.
Now, run the setup file of Qualcomm QDL Driver according to your Windows Architecture
(32 bit or 64 bit)
Click next
select free bid option and click next
Qualcomm Driver Installer
 
The Installation Wizard would begin now, click on Next.
You need to accept the terms of the license agreement in order to continue. So accept the terms of the license agreement.
 
Now, click on the Install button to begin the installation.
qdloader driver install package
 
wait till the setup copies the Driver files into your PC
 
Once the installation complete , click Finish Button To exit setup.
qualcomm driver install finish
 
Restart Your PC.
 
If You Don’t Have Miracle Box Installed
Follow This Guide.
Unlocking Oppo A57
Start Miracle Box .
Navigate to Qualcomm tab then select Read/Format flash
Oppo a57 Unlock FRP And Pattern
Tick everything as the picture above.
Use safe mode to prevent damage to your handset.
Connect your phone by pressing Vol up+ Vol Down then insert USB cable.
Driver Will started installing.
Select port
Click start button
You Can see bootloader log on screen
Logs:-

Phone switched Off
2. Press Vol+ or Vol-,Connect Mobile with USB Cable
Or use specialized USB Cable,Enter Edl(9008) mode
3. Scan Port
Definition Applied
Connecting to Phone,Wait..
Conncet Ok.
Manual boot: prog_emmc_firehose_8937_ddr_opp_A57.mbn
product.model:CPH1701
display.id:CPH1701EX_11_A.34_180806
product.brand:OPPO
version.release:6.0.1
product.brand:Android
product.manufacturer:OPPO
Read Error. ID: 3333
1. Phone switched Off
2. Press Vol+ or Vol-,Connect Mobile with USB Cable
Or use specialized USB Cable,Enter Edl(9008) mode
3. Scan Port
Definition Applied
Connecting to Phone,Wait..
Conncet Ok.
Manual boot: prog_emmc_firehose_8937_ddr_opp_A57.mbn
product.model:CPH1701
display.id:CPH1701EX_11_A.34_180806
product.brand:OPPO
version.release:6.0.1
product.brand:Android
product.manufacturer:OPPO
Being Format(Safe)…
Done.

Success msg will show disconnect your phone and reboot.
 
 
 

Leave a Comment

Your email address will not be published. Required fields are marked *